The separated and pressurized solar water heater is composed of solar collector, storage tank, intelligent controller, working station (such as pump) and other accessories
Working principles:
When the temperature of the solar collector reaches the set value, the controller shall start the circulation pump automatically
The circulation pump makes heat-conducting liquid circulate automatically
The heat-conducting liquid transfers heat to water by heat exchanger in the water tank
In case the temperature of the water tank does not reach the maximum, then start the auxiliary heating device
In case the temperature of the circulation pump does not reach the set value, the circulation pump shall be shut automatically
Features:
Collector separates with the storage tank. The tank can be put anywhere. The collector can be put on the inclined roof or flat place
Module design, arbitrary combination, harmony with the building perfectly
Intelligent control and automatic operation
Anti-freeze: no water inside the tubes when it works. Its lowest working temperature is -40 degrees
The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature
Multifunction: bathing, washing, domestic heating, and could be conected with the gas or electric heaters
